
The short version
- Start in aperture priority so you choose the aperture and the camera handles the shutter speed for you.
- Sony's FX3 help guide says Face/Eye Prior. in AF is on by default, so eye autofocus works right away.
- Use single-shot focus for a person who holds still and continuous focus for a person who moves.
- Pairing face and eye priority with the Tracking focus area keeps focus on a moving eye or face, according to Sony.
- Keep ISO as low as the light allows, and test higher ISO numbers yourself instead of trusting the top of a spec sheet range.
- For video portraits, Newsshooter's review notes that the right shutter for 24 fps is 1/48 second, and that on the FX3 you set 1/50 second instead.
The best camera settings for portraits start with aperture priority, your camera's face and eye autofocus switched on, and single-shot focus for a person who holds still or continuous focus for a person who moves. From there, you keep ISO as low as the light allows, check that your shutter speed is quick enough to stop blur, and set white balance so skin looks natural.
I shoot on a Sony FX3, and I own a Canon 5D Mark II and a Canon 5D Mark III. I have done paid photo and video work since 2008. The advice below works on any camera. Where a menu name shows up, it comes from the camera maker's own help pages, and each fact is marked with where it came from.
Start in aperture priority
Think of your lens like the pupil of your eye. In a dark room your pupil opens wide, and in bright sun it gets small. The aperture is the lens's pupil.
Aperture priority is a halfway step between auto and full manual. You choose one thing, the aperture, and the camera handles the shutter speed. Look for it on your mode dial or in your shooting mode menu, and check your manual for the exact name your camera uses.
Compare that with full auto. Sony's help guide describes its Intelligent Auto mode as one where the camera focuses and sets the exposure on its own, based on the shooting conditions. That is a fine place to begin, and there is nothing wrong with using it. It just makes every choice for you. Aperture priority gives you back the one choice that shapes a portrait the most.
Aperture for one person
Your lens shows the aperture as an f-number. For example, f/2 is a bigger opening than f/8. It feels backward at first, and that is normal.
For one person, start at the smallest f-number your lens offers. Take a shot, then zoom in on the eyes on your screen. If the nose is sharp but the eyes are soft, or only one eye is sharp and you wanted both, raise the f-number a step or two and try again. Each soft frame tells you something, so treat it as a clue, not a failure.
Aperture for groups
Sony's FX3 help guide says the camera can detect the faces of up to 8 people. Finding a face is not the same as getting that face sharp, though.
For two or more people, use a bigger f-number than you would for one person. Then zoom in on the faces farthest from you. If the back row looks soft, raise the f-number again and retake. You can also help yourself by lining people up so their faces sit about the same distance from your camera, like books lined up on one shelf instead of stacked on two.
Check your shutter speed so nothing blurs
The shutter speed is like a door that opens and closes. A quick door lets in a tiny slice of time. A slow door lets in a longer slice, and anything that moves while the door is open can smear.
In aperture priority, the camera picks this number for you. Your job is to glance at it on your screen before you press the button. If it looks slow and your photos come out soft all over, the door is staying open too long.
For a person sitting still, you mostly need a door quick enough for your own hands. For a person who moves, like a child running or a couple walking toward you, you need a quicker door. Raise your ISO one step, or lower your f-number one step, and watch the shutter number on your screen change. Keep going until your test shots come out sharp.
For scale, Sony's specification page lists still shutter speeds from 1/8000 second to 30 seconds on the FX3.
If you film portraits instead
Video works a little differently. Your frame rate is the number of pictures per second, like the pages of a flip book. In Newsshooter's hands-on review, the writer explains that 1/48 second is the proper shutter speed for 24 fps video, and that on the FX3 you set it to 1/50 second instead. The same review points out that when you change frame rate on that camera, you also need to change the shutter speed by hand.
Keep ISO as low as the light allows
ISO is like the volume knob on a radio. Turn it up and a quiet song gets louder, but turn it too far and you start to hear crackle. In photos, that crackle shows up as grainy speckles called noise.
Start at your camera's lowest ISO. Raise it only until your shutter speed is quick enough for your subject. Here is what two makers list:
| Camera | Standard still ISO range | Extended or special case |
|---|---|---|
| Sony FX3 | ISO 80 to ISO 102,400 | Extended: minimum ISO 40, maximum ISO 409,600 |
| Canon EOS 5D Mark IV | ISO 100 to 32000 | ISO 200 to 32000 when highlight tone priority is on |
A wide range on a spec sheet tells you what a camera allows, not what you will like. Take a few test shots of a face at different ISO numbers, zoom in on the skin, and decide where the crackle starts to bother you. Write that number down. It becomes your personal ceiling.
Turn on your camera's eye autofocus
Eye autofocus is the single most helpful portrait setting on a modern camera. Sony's help guide says the camera can automatically detect faces and eyes and focus on the eyes.
On Sony's cameras the setting is called Face/Eye Prior. in AF, and it sets whether the camera looks for faces or eyes in the focus area and then focuses on the eyes on its own. Sony's menu path is MENU, then Focus, then Face/Eye AF, then Face/Eye Prior. in AF. Sony's guide says this is turned on in the default settings, so you can use eye focus right away. In Intelligent Auto, it is locked on.
Here is how it behaves, in Sony's words. When it is on, the camera focuses on faces or eyes first if they are inside or around your chosen focus area. If it finds no faces or eyes there, it focuses on another subject it can detect. When it cannot focus on the eyes, it focuses on the face instead. And in some conditions it may miss faces or mistake other objects for faces. So keep an eye on the little focus box on your screen.
Using a button for eye focus
You can also put eye focus on a button. Sony's guide says you can assign Eye AF to a custom key, and the camera focuses on eyes for as long as you press that key. To take a photo, you point at the face, hold the key, and press the shutter button while still holding it.
In this button mode, the camera focuses only on faces or eyes anywhere on the screen, no matter how your focus area is set. If it sees no face or eye at all, it does not jump to another subject.
Choosing which eye
Sony's Right/Left Eye Select setting lets you choose which eye the camera focuses on when the subject is set to Human. The path is MENU, then Focus, then Face/Eye AF, then Right/Left Eye Select. On auto, the camera picks either eye itself. The "right eye" option means the subject's right eye, which is the one on the left side from where you stand. The "left eye" option is the eye on the right side from your view.
Try putting focus on the eye nearest the camera when your subject is turned a little to one side. Leave it on auto when people are moving around.
Pick a focus mode and focus area
The focus mode decides whether the camera focuses once and stops, or keeps adjusting. Sony's help guide suggests Single-shot AF for still subjects and Continuous AF for moving subjects.
Single-shot is handy for posed portraits. Sony says you can lock focus on a non-moving subject with Single-shot AF. Press the shutter button halfway to lock focus, move the camera to the framing you want, then press all the way down.
Your camera also tells you when it worked. In Sony's guide, a beep sounds and an indicator lights up when the image is in focus. When the camera cannot focus, the indicator flashes and there is no beep, and Sony suggests you recompose or change the focus setting. In Continuous AF, the indicator lights up but the beep does not sound, so do not wait for one.
Focus area
The focus area is where on the screen the camera looks. Sony's guide says Center Fix makes it easier to focus on subjects in the middle of the frame. For a person who moves, Sony says combining Face/Eye Prior. in AF with the Tracking focus area keeps focus on a moving eye or face.
On Canon's side, Canon's museum page lists 61 AF points on the EOS 5D Mark IV, with the central point able to focus in light as low as EV -3. If your camera has a center point rated for dim light, try placing it right on the eye when the room gets dark.
Choose a drive mode
The drive mode decides what happens when you hold the button down. Single shot takes one photo per press. Continuous takes a quick series, like a flip book.
Use single shot for calm, posed portraits. Switch to continuous when expressions change fast, like a laugh or a child mid-jump, so you can pick the best moment later. For a sense of speed, Canon lists a maximum of approximately 7 frames per second for the EOS 5D Mark IV, measured under Canon's own testing standards with a specific card and settings. A burst also gives you more files to sort, so use it when the moment calls for it.
Set white balance so skin looks like skin
White balance is how your camera decides what "white" looks like. If a white shirt looks blue or orange on your screen, this is the setting to change.
Start on auto white balance. Look at your subject's skin on the screen. If it looks off, try the preset that matches your light and compare the two shots side by side. Once you like it, keep it the same for the whole session so every photo matches.
If your camera shoots RAW, as the FX3 does, turning RAW on gives you a file with more room to adjust later on your computer. For video, CineD's review describes Sony's S-Cinetone picture profile as designed for a film-like color and pleasing skin tones.
Starting portrait settings for four kinds of light
These are starting points, not rules. Set them, take one test shot, zoom in on the eyes, and adjust from there.
| Light | Mode and aperture | Shutter speed | ISO | Focus | White balance |
|---|---|---|---|---|---|
| Window light | Aperture priority, lowest f-number for one person | Check it is quick enough for steady hands | Raise only until the shutter number is quick enough | Single-shot AF with face and eye priority on | Auto, then compare with a preset |
| Outdoor shade | Aperture priority, low f-number for one, higher for groups | Watch it closely if your subject moves | Start at your lowest | Single-shot for posed, continuous with Tracking for kids | Auto, or the shade preset; compare both |
| Golden hour | Aperture priority, low f-number | The light keeps changing, so recheck it often | Raise step by step as the light drops | Continuous with Tracking if people walk, single-shot if posed | Auto first; compare with a preset if the color looks off to you |
| Indoor room light | Aperture priority, lowest f-number | Check it every few frames in a dim room | Expect to raise it, up to your personal ceiling | Face and eye priority on; try the center point on the eye in dim light | The preset that matches your bulbs, or auto |
After each test shot, look at two things. First, are the eyes sharp? If not, check the focus box and your focus mode. Second, is the whole photo soft? If so, your shutter speed is probably too slow, so raise ISO a step and try again.
The cameras behind the menu names
The menu names above come from Sony's help guide for the FX3 and from Canon's page for the EOS 5D Mark IV. Your camera may use different words for the same ideas, so keep your manual close.
Sony announced the FX3 in February 2021. Newsshooter's review says it shoots 12.1 megapixel stills. It has no electronic viewfinder, and Newsshooter's reviewer found the rear screen alone too small for full-time use and hard to use outside. If you shoot portraits outdoors with a screen only, shade it with your hand and zoom in to check the eyes. Newsshooter listed the FX3 at $3,899.99 USD at launch. Prices change, so check the current listing. If you shoot on an FX3 or FX30, theCamera.School sells a $29 "Your first 30 days" settings pack for those two cameras.
Canon lists the EOS 5D Mark IV with an approximately 30.4 million effective pixel full-frame sensor. It also supports Dual Pixel RAW, which works with Canon's free Digital Photo Professional software for small adjustments such as image micro-adjustment and bokeh shift. Canon lists 4K video at 30p, plus a frame grab feature that pulls approximately 8.8 megapixel JPEG stills from 4K video. Prices change, so check the current listing before you buy.
For a step-by-step version on one Canon body, see this camera-specific portrait settings guide. Whatever you shoot on, give yourself permission to miss a few frames. Every soft photo teaches you which setting to touch next.
Questions
What is the best camera mode for portraits?
Aperture priority is a friendly place to start, because you choose the aperture and the camera chooses the shutter speed. Full auto makes every choice for you: Sony's help guide describes its Intelligent Auto mode as one where the camera focuses and sets exposure on its own. Aperture priority hands you back the one choice that shapes a portrait the most.
Should I use single-shot or continuous autofocus for portraits?
Sony's help guide suggests single-shot AF for still subjects and continuous AF for moving subjects. Single-shot also lets you lock focus on a person who is not moving. If your subject is a child, a dancer, or a couple walking toward you, switch to continuous.
What aperture should I use for a group photo?
Start with a bigger f-number than you would use for one person, then zoom in on your screen and check the faces in the back. If any face looks soft, raise the f-number again and retake. Sony's FX3 help guide says the camera can detect up to 8 faces, but finding a face is not the same as getting it sharp, so always check.
What shutter speed should I use for video portraits?
In Newsshooter's hands-on review, the writer explains that 1/48 second is the proper shutter speed for 24 fps video, and that on the FX3 you set it to 1/50 second instead. The same review notes that if you change frame rate, you also need to change shutter speed by hand on that camera.
Why won't my camera focus on the eye?
Sony's help guide says that when the camera cannot focus on the eyes, it focuses on the face instead. It also warns that in some conditions the camera may not detect faces at all, or may mistake other objects for faces. If the focus indicator flashes and there is no beep, Sony suggests you recompose the shot or change the focus setting.
How we researched this
On Nov 17, 2026 we checked the 22 factual statements in this guide (specs, numbers and comparisons) against the sources below. 21 were confirmed. 1 could not be confirmed from these sources yet.
- ILME-FX3 | Help Guide | Focusing on human eyes · helpguide.sony.net
- ILME-FX3 | Help Guide | Face/Eye Prior. in AF (still image/movie) · helpguide.sony.net
- ILME-FX3 | Help Guide | Shooting still images (Intelligent Auto) · helpguide.sony.net
- EOS 5D Mark IV - Canon Camera Museum · global.canon
- ILME-FX3 | Help Guide | Specifications · helpguide.sony.net
- Canon EOS C50 vs Sony FX3: Which Camera Wins: And Does It Matter? | CineD · cined.com
- Hands-on review of the Sony FX3 - Newsshooter · newsshooter.com